The maintenance of jade The ancients talked about raising jade, a "raising" word not only revealed the material of jade, but also contained many knowledge. There are roughly the following points to summarize:
1. Avoid collision with hard objects. Although the hardness of jade is high, it is easy to crack after being collided. Sometimes, although the naked eye does not see cracks, in fact, the molecular structure in the jade surface has been damaged and has dark cracks, which greatly damages its perfectness and economic value.
2, avoid dust as much as possible. If there is dust in the daily jade, it should be cleaned with a soft brush; if dirt or oil stains are attached to the jade surface, it should be washed with a warm soap and water, and then rinsed with water. Do not use chemical oil removal solution.
3, when the pendant is not used. It is best to put it in a jewelry bag or jewelry box to avoid rubbing or damaging. If it is a high -end jade jewelry, let alone put it on the counter to exempt the dust and affect the transparentness.
4. Try to avoid contact with perfume, chemical solution, soap and human sweat. As we all know, sweat with salt, volatile fatty acids, and urea. The jade articles are exposed to too much sweat. After wearing it, it will be eroded without wiping it immediately, which will cause the outer layer and affect the brightness of the original. Especially the "glass land" emerald and sheep fat white jade, even more avoided sweat and fat. Many people think that the more emerald is exposed to the human body, the better the warmth such as sweat. In fact, this is a big misunderstanding. Emerald is different from ancient jade. The process of ancient jade needs to be reborn, and the body temperature is required. The "glass land" Cuiyu itself is crystal clear. It is not necessary to use any method, and it is impossible to make it more translucent. If sheep fat and white jade expose sweat too much, it will easily become pale yellow and no longer pure white.
5, avoid long -term direct sunlight. Jade articles should avoid the exposure of sunlight, because the jade is expanded and the molecular volume increases, which will affect the jade. In particular, hibiscus jade, crystal, agate, etc. will burst when high fever, so it is even more avoided.
6, wearing pendants should be wiped with a clean and soft white cloth, and it is not advisable to use staining cloth and fiber -grained fabric. Jade jewelery inlaid with gems such as diamonds, red and sauce, and emeralds should only be wiped with clean white cloth to wipe the oil, dust, impurities, moisture or sweat, which helps maintain and maintain the original quality.
7, jade articles should maintain appropriate humidity. Jade should be maintained by a certain humidity, especially water gall agate and crystal jade. During the formation period of water gall agate, natural water is there. If the surrounding environment does not maintain a certain humidity, if it is very dry, the natural water inside will easily evaporate, thereby losing the art and economic value of its collection.
The exquisite jade parts need to be maintained. If you maintain well, you will not lose the former Qianli and Elegant, because the jade has the nutrition given to her when the jade is in the ground. Not dry. After the jade piece is done, the last process is the beauty of jade pieces. Applying her high -level protection wax of oil to her. The purpose is to nourish jade and protect jade. The skin and human skin are definitely the same. With humidity, jade parts have been worn for a long time, and some seem to have gray, and the jade body is not moisturized and dry, so it is necessary to regularly remove and replenish it. I will introduce a maintenance method to my friends. In the pot to add water to put the jade piece like steamed buns. After steaming the jade piece, use a clean cloth to line with the jade piece with a cloth. Do not use chemical fiber cloth. Go to the ash traces on the jade body, and then apply a layer of high -quality wax quality again. The smear is evenly applied, and after the jade parts are cold, wipe it with a raw white cloth multiple times. It is best to cotton. Remove the excess waxy above.
1. People support. The process of wearing and playing is the continuous wipe and stroke of the jade. Even if the skin of jade and palms, wrists, breasts, necks, and faces, etc. Human support methods are widely used, suitable for various occasions and various jade. 2, water care. The importance of water does not need to be emphasized. In practice, we find that the water inside the jade is an important factor in the stability of the jade structure. In an environment where the dry season or air is too dry, the jade does not get appropriate moisture and moisturizing, and prompts the internal water volatilization of the jade. And the maintenance method is adopted. The glass of jewelry jade packets is often placed with water filled with water. The air humidity is adjusted through the evaporation of the water in the glass, which plays two effects on the jade in the counter. It, the water inside the jade is not volatile in a sufficient water environment. The second, jade itself can also supplement the water required. Increasing the humidity of the environment where the jade is located is an important way to cultivate. Emerald is the most important example of water care. It is regularly placed in water for more than half an hour to keep the emerald's glorious and moisturizing. 3, sealing. The jade hard plastic bag will be sealed. This is to isolate the impact of the environment and climate change on jade, which is conducive to stabilizing the nature of jade. 4, oil care. Oil care is the most important maintenance method. Some jade stones will appear cotton lines and cotton spots after a period of time. Practical experience has proven that appropriate oil can be eliminated in a short period of time to eliminate cotton lines and cotton spots to restore the original jade appearance. 5, wax. That is, apply a layer of liquid paraffin on the surface of the jade, also known as sealing wax, which plays the same role as the seal. The external environment where the temperature is moderate, the air is moisturized, and the clean and refreshing is the prerequisite for the stable nature of Barin Stone, Changhua Stone, and Qingtian Stone. The actual conditions make it difficult for the external environment to meet such high requirements for a long time. Waxing is often used to prevent the material from cracking and loose structure due to environmental impact. 6, comprehensive maintenance. That is, two or three in the above -mentioned maintenance methods. No matter what kind of maintenance method is adopted, it is necessary to clean the dust, dirt and various attachments on the surface of the jade surface before maintenance to ensure the maintenance effect.
Maintenance of gemstone jade: 20%neutral dishwashing or shampoo cleaning, liquid temperature 25 degrees Celsius for 10 minutes, then slowly brush with a toothbrush, soak it with tap water for 20 minutes after the sweat stains dirt can be soaked for 20 minutes. Essence
It gold and silver jewelry jade wares to rinse, dry with silk, such as scratches and scratches on its surface, you can apply a layer of white jade toothpaste on its surface, wipe it with silk cloth, and you can use cloth with cloth. You can also use cloth. The sand wheel is polished, or the green oil is shining. The necklace and gold earrings can be poured a little watch oil on the hooks and screws, or the light coating protective film. The commonly used light protective film is paraffin. The commonly used gem protective film is pink nail polish. Nail oil is suitable for wide, such as chest ornaments, rings, earrings, items, brooches, sleeves, etc.
The protective agents currently are: transparent electrical paint, B0L type acrylonic paint; Soz type polyuretine paint. It is mostly suitable for high -end gems, such as emeralds, rubies, blue treasures, sea sails, emeralds, etc.
00:00 / 01: 0170% shortcut keys: Play / suspend ESC: Exit full screen ↑: increase volume 10% ↓: decreases by 10% →: Single fast forward 5 seconds studio Here you can drag no longer appear in the player settings to reopen the small window shortcut key description
Shortcut keys to describe space: Play/ pause ESC: Exit full screen ↑: increased by 10% ↓: A amount of volume decreases 10% →: Single fast forward 5 seconds ←: Press 5 seconds in a single fast retreat. You can re -open the small window in the player settings and play the error, please refresh your try
The maintenance of jade
The ancients talked about raising jade, a "raising" word not only revealed the material of jade, but also contained many knowledge. There are roughly the following points to summarize:
1. Avoid collision with hard objects. Although the hardness of jade is high, it is easy to crack after being collided. Sometimes, although the naked eye does not see cracks, in fact, the molecular structure in the jade surface has been damaged and has dark cracks, which greatly damages its perfectness and economic value.
2, avoid dust as much as possible. If there is dust in the daily jade, it should be cleaned with a soft brush; if dirt or oil stains are attached to the jade surface, it should be washed with a warm soap and water, and then rinsed with water. Do not use chemical oil removal solution.
3, when the pendant is not used. It is best to put it in a jewelry bag or jewelry box to avoid rubbing or damaging. If it is a high -end jade jewelry, let alone put it on the counter to exempt the dust and affect the transparentness.
4. Try to avoid contact with perfume, chemical solution, soap and human sweat. As we all know, sweat with salt, volatile fatty acids, and urea. The jade articles are exposed to too much sweat. After wearing it, it will be eroded without wiping it immediately, which will cause the outer layer and affect the brightness of the original. Especially the "glass land" emerald and sheep fat white jade, even more avoided sweat and fat. Many people think that the more emerald is exposed to the human body, the better the warmth such as sweat. In fact, this is a big misunderstanding. Emerald is different from ancient jade. The process of ancient jade needs to be reborn, and the body temperature is required. The "glass land" Cuiyu itself is crystal clear. It is not necessary to use any method, and it is impossible to make it more translucent. If sheep fat and white jade expose sweat too much, it will easily become pale yellow and no longer pure white.
5, avoid long -term direct sunlight. Jade articles should avoid the exposure of sunlight, because the jade is expanded and the molecular volume increases, which will affect the jade. In particular, hibiscus jade, crystal, agate, etc. will burst when high fever, so it is even more avoided.
6, wearing pendants should be wiped with a clean and soft white cloth, and it is not advisable to use staining cloth and fiber -grained fabric. Jade jewelery inlaid with gems such as diamonds, red and sauce, and emeralds should only be wiped with clean white cloth to wipe the oil, dust, impurities, moisture or sweat, which helps maintain and maintain the original quality.
7, jade articles should maintain appropriate humidity. Jade should be maintained by a certain humidity, especially water gall agate and crystal jade. During the formation period of water gall agate, natural water is there. If the surrounding environment does not maintain a certain humidity, if it is very dry, the natural water inside will easily evaporate, thereby losing the art and economic value of its collection.
The exquisite jade parts need to be maintained. If you maintain well, you will not lose the former Qianli and Elegant, because the jade has the nutrition given to her when the jade is in the ground. Not dry. After the jade piece is done, the last process is the beauty of jade pieces. Applying her high -level protection wax of oil to her. The purpose is to nourish jade and protect jade. The skin and human skin are definitely the same. With humidity, jade parts have been worn for a long time, and some seem to have gray, and the jade body is not moisturized and dry, so it is necessary to regularly remove and replenish it. I will introduce a maintenance method to my friends.
In the pot to add water to put the jade piece like steamed buns. After steaming the jade piece, use a clean cloth to line with the jade piece with a cloth. Do not use chemical fiber cloth. Go to the ash traces on the jade body, and then apply a layer of high -quality wax quality again. The smear is evenly applied, and after the jade parts are cold, wipe it with a raw white cloth multiple times. It is best to cotton. Remove the excess waxy above.
1. People support. The process of wearing and playing is the continuous wipe and stroke of the jade. Even if the skin of jade and palms, wrists, breasts, necks, and faces, etc. Human support methods are widely used, suitable for various occasions and various jade.
2, water care. The importance of water does not need to be emphasized. In practice, we find that the water inside the jade is an important factor in the stability of the jade structure. In an environment where the dry season or air is too dry, the jade does not get appropriate moisture and moisturizing, and prompts the internal water volatilization of the jade. And the maintenance method is adopted.
The glass of jewelry jade packets is often placed with water filled with water. The air humidity is adjusted through the evaporation of the water in the glass, which plays two effects on the jade in the counter.
It, the water inside the jade is not volatile in a sufficient water environment.
The second, jade itself can also supplement the water required. Increasing the humidity of the environment where the jade is located is an important way to cultivate. Emerald is the most important example of water care. It is regularly placed in water for more than half an hour to keep the emerald's glorious and moisturizing.
3, sealing. The jade hard plastic bag will be sealed. This is to isolate the impact of the environment and climate change on jade, which is conducive to stabilizing the nature of jade.
4, oil care. Oil care is the most important maintenance method. Some jade stones will appear cotton lines and cotton spots after a period of time. Practical experience has proven that appropriate oil can be eliminated in a short period of time to eliminate cotton lines and cotton spots to restore the original jade appearance.
5, wax. That is, apply a layer of liquid paraffin on the surface of the jade, also known as sealing wax, which plays the same role as the seal. The external environment where the temperature is moderate, the air is moisturized, and the clean and refreshing is the prerequisite for the stable nature of Barin Stone, Changhua Stone, and Qingtian Stone. The actual conditions make it difficult for the external environment to meet such high requirements for a long time. Waxing is often used to prevent the material from cracking and loose structure due to environmental impact.
6, comprehensive maintenance. That is, two or three in the above -mentioned maintenance methods. No matter what kind of maintenance method is adopted, it is necessary to clean the dust, dirt and various attachments on the surface of the jade surface before maintenance to ensure the maintenance effect.
Maintenance of gemstone jade: 20%neutral dishwashing or shampoo cleaning, liquid temperature 25 degrees Celsius for 10 minutes, then slowly brush with a toothbrush, soak it with tap water for 20 minutes after the sweat stains dirt can be soaked for 20 minutes. Essence
It gold and silver jewelry jade wares to rinse, dry with silk, such as scratches and scratches on its surface, you can apply a layer of white jade toothpaste on its surface, wipe it with silk cloth, and you can use cloth with cloth. You can also use cloth. The sand wheel is polished, or the green oil is shining. The necklace and gold earrings can be poured a little watch oil on the hooks and screws, or the light coating protective film. The commonly used light protective film is paraffin. The commonly used gem protective film is pink nail polish. Nail oil is suitable for wide, such as chest ornaments, rings, earrings, items, brooches, sleeves, etc.
The protective agents currently are: transparent electrical paint, B0L type acrylonic paint; Soz type polyuretine paint. It is mostly suitable for high -end gems, such as emeralds, rubies, blue treasures, sea sails, emeralds, etc.
00:00 / 01: 0170% shortcut keys: Play / suspend ESC: Exit full screen ↑: increase volume 10% ↓: decreases by 10% →: Single fast forward 5 seconds studio Here you can drag no longer appear in the player settings to reopen the small window shortcut key description
Shortcut keys to describe space: Play/ pause ESC: Exit full screen ↑: increased by 10% ↓: A amount of volume decreases 10% →: Single fast forward 5 seconds ←: Press 5 seconds in a single fast retreat. You can re -open the small window in the player settings and play the error, please refresh your try